DIY: Mini easel / Como hacer mini atril



Hola! despues un tiempito.. traigo un tutorial bastante simple que me pareció divertido, hace unas semanas vi este tutorial, pensando que iba a explicar como hacer el mini atril, ya que nunca había visto uno tan chiquito! pero no... así que como me pareció fácil de recrear acá les dejo mi versión con un tutorial paso a paso:

Hi! After a time a bring a really simple tutorial of how to make a mini easel!, I saw last week this photo over pinterest and I though the tutorial was on how to make the mini easel, because I have never seen one so small! but it wasn't.... so I decided to make one! Here is how it turned out:


1. Primero hay que cortar 3 palitos de madera balsa (al principio corte el del medio más largo pero después lo corté más corto) dos de 11cm y el del medio de 10,5 cm 
2.Cortar con un cutter en forma de punta los dos palitos de los extremos, y juntarlos para ver si arman el angulo deseado

1. Cut 3 sticks, two of 11 cm and one of 10,5 cm
2. With cutter cut the end of the 11cm stick's in a way it form the angle as shown in the picture:
(click to see larger)
3. Con una mecha o un clavito hacer un agujero en los tres palitos
4.  Después pasar un palillo/ escarbadiente por el agujerito
5. Cortar los bordes para que no queden execedentes
3. With a nail make a hole through the three sticks.
4. then pass a toothpicks through it
5. Cut the points
6.  Cortar un palito de 7cm aproximadamente y ponerle cola en cada uno para pegarlo a los palitos de los extremos.
7. Cut a 7cm sticks and put glue in the points and stick it to the previous structure
El cuadradito rosa donde escribí: DIY mini easel, es no más que un post it!
The pink square is no more than a Post it! you can make your own canvas with a post it! cool idea, dont you think?
Love, Agus
For more updates like my Facebook Page


  1. excelente explicación y supoer sencillo....

    ReplyDelete
  2. So cute!! Thanks for sharing at Terrific Tuesdays.
    Rachel
    adventuresofadiymom.blogspot.com

    ReplyDelete
  3. Hi Agustina, just stopping by to say how delightful your blog is. Thanks so much for sharing. I have recently found your blog and am now following you, and will visit often. Please stop by my blog and perhaps you would like to follow me also. Have a wonderful day. Hugs, Chris
    http://chelencarter-retiredandlovingit.blogspot.ca/

    ReplyDelete
  4. Me encantó!
    Lo voy a guardar :)
    Gracias por compartir tanto!

    ReplyDelete
  5. What previous structure are you referring to in number 7? There are some details missing!!

    ReplyDelete
    Replies
    1. I think you just glue it to the two outside parts of the easel.

      Delete
  6. What previous structure are you referring to in number 7? There are some details missing!!

    ReplyDelete
  7. ¡Qué adorable!, lo haré seguro.

    ReplyDelete
  8. Where can you get these little sticks? And what are they known as?

    ReplyDelete

Thanks for the comment (:
You can write my and email to at: agustinayornet@gmail.com


Photonica | Diseño gráfico y web
Copyright © Agus Yornet Blog